The locking on off switches (P/No 317-594) are available from RS Components.

The easiest way is to phone the 1300 656 636 number and use a credit card. Price is about $15 plus GST and $10 delivery.

Magnets are available from:

SEKAO Engineering Pty Ltd
Unit 18 - 115 Robinson Road
Geebung QLD 4034

Phone (07) 3623 9888

web site is www.sekao.com.au Their contact details are there also.

Magnets normally used are the 6.35 x 6.35 rod P/No 21050 for the front wheel and input shaft sensing and the 8 mm x 5 mm disk P/No 20065 for the diff collar.

The Wide Open Throttle switch is a standard $4 item from Dick Smith Electronics, P/No P7800. They have never failed yet.

Note that it has 4.8 mm blade terminals. Don't use a 6.4 mm spade terminal on the wires if you do a retermination. Also only use the COM (Common) and NO (Normally Open) terminals. Cut the NC (Normally Closed) terminal off to save confusion.

The VDO oil pressure senders come from

SGESCO
17 Rodwell Street
Archerfield QLD 4108

Ph (07) 3715 3715
Fax (07) 3274 1217

Contact www.sgesco.com.au The VDO part numbers are in the pressure_senders page. There are other VDO resellers around Australia, but they don't all stock the senders. SGESCO in Archerfield (Brisbane) have always had stock (except once in 9 years that I have been going there.)

24 May 2006